Mola speed right? You do not know if I will too but I enjoy capturing the speed through the lens of my camera. The typical fast action that happens before your eyes in 3, 2 seconds or even less than a second. I love to keep it. Every time I shot a picture of something fast moving huge amounts of highly addictive adrenaline through me brain.
Many readers of the blog you were asking me via comments on previous articles on what type of camera used to capture pictures at high speed. While it is true that the camera and its performance is very critical, always have always said that how we use that camera is also something that influences a lot in the end result in how sharp will be our photo.
Well, without further delay we will reveal the formula that boasts a photographer (professional or amateur) must continue to take extremely sharp, clear photos of moving objects and subjects.
How to photograph clearly a fast moving
On the one hand we have the camera settings that will be put as follows. It is always advisable to use the Manual mode dial on the camera in order to control all the settings to our liking:
1 – Shutter Speed
We adjust the shutter speed of our camera to a very high speed. We can try to 1 / 500, if we do not work very well tested with 1 / 1000, does not operate even further raise the speed to 1 / 2000, and then we go to find the optimum point.
2 – Open / diaphragm
As we apply the previous point we realize that the picture is coming more and more dark. To combat this we will change the camera settings to a large aperture, thus allowing enough light out. The opening / aperture is expressed by the value f /, the lower value will be greater openness and more light will enter. For example f/3.5 means an opening large enough and therefore shall not enough light, but still dark and the picture comes out, we lower the value f / even (within the possibilities that allow our camera.) F/1.8 is worth our photo will offer much more light.
Care, the opening / diagrafma also affects depth of field. A very large aperture (f value / very low) will have a very limited depth of field and therefore the object in focus will be very focused and very blurred background.
Between point 1 and point 2 is to go experimenting and playing. When the faster the shutter speed to say the smaller the value f / (opening larger) will be used.
ISO 3-Value
By now you should be able to get a decent picture, but still we leave the dark photo, but wisely we can pull the ISO value. Recall that the ISO gives more light to the photo (because it makes the sensor more sensitive to photons) but carries the disadvantage that the picture becomes more noise.
4 – Continuous shooting
Most SLR cameras allow you to shoot in burst current. This will help us to find the “golden time” more easily, because even if we move the pulse vibrate slightly or hand us something, if a picture comes medioborrosa the next or the next one will have to go right. Some cameras allow up to 10 pictures per second burst, others only 3 per second.
Getting right time to capture the look is a real satisfaction, as it is to combat the speed and defy the laws of physics in an effort to obtain the moment we like and guardárnoslo for us. On the other hand transmit speed and movement through a still image is a challenge that we can measure our progress as a photographer.
